|
Hangzhou Fuyang Jincanda Water Treatment Equipment Co.,ltd
|
Large Industrial RO Reverse Osmosis Membrane Cleaning System For Acid And Alkaline Chemical
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Large Industrial RO Reverse Osmosis Membrane Clea
Large Industrial RO Reverse Osmosis Membrane Cleaning System For Acid And Alkaline Chemical
Quick Detail:
Good design
High quality
Reasonable price
Short delivery
Standard Features:
The membrane cleaning skid is designed for manual operation through a local control box located on the skid. A chemical storage tank is mounted on its own stand and connected to the membrane cleaning skid with either hard PVC piping or quick disconnect fittings and flexible hoses. This gives the unit the ability to be mounted in a permanent location or totally portable if desired. The piping is schedule 80 PVC that is hydrostatically tested at the factory. The electrical enclosure is NEMA 4X. All membrane cleaning skid wiring is completed and tested before shipment.
Skid mounted unit
Chemical solution tank with cover
PVC piping
316L Stainless cleaning pump
5 micron cartridge filter with stainless steel housing (CS8) or polypropylene (CS4)
Local flow meter
Tank level switch (CS 8)
220V/1Ph/60Hz or 460V/3Ph/60Hz
Available Options220V/1Ph/50Hz or 380-415V 3Ph 50Hz
pH Controller
Electric heater for chemical tank with
temperature controller
Flexible hoses for cleaning connection
Wheel mounted skids for smaller units
Mixer
Applications Membrane cleaning
Descaling
Membrane Cleaning Chemicals
Acid and alkaline cleaning chemicals are most commonly used for membrane cleaning. Acid cleaners are designed to remove inorganic and iron deposits. Acid cleaning should be performed at a pH of about 2. Alkaline cleaners are designed for removal of biological matter, organic foulants, and silica deposits. Alkaline cleaning is performed at a pH of about 12.
Membrane Cleaning Process Reverse Osmosis membrane elements can experience a decline in performance due to the accumulation of deposits on the membrane surface. Mineral scale, colloidal particles, biological matter, and insoluble organic compounds are the usual causes of membrane fouling. When production of a Reverse Osmosis system drops by at least 10 percent, or the differential pressure increases by 15 percent (over normal operating conditions), membrane cleaning should be performed using a membrane cleaning skid. The following is a summary of the design of JCD WATER membrane cleaning skids and cleaning chemicals. More detailed instructions are available in the Operating and Maintenance manual for the JCD WATER Cleaning Stations.
Specifications:
